USB Cable

This page describes the process of updating your firmware via USB cable using the Web Flasher. This is a last resort and should only be used if In-App Update and Recovery Mode were unsuccessful.

Flashing your device will DELETE ALL STORAGE, including WiFi credentials. After updating firmware via this method, you will need to go through the WiFi setup process again in order to reconnect your device.

You may need to install drivers for the USB Flasher to work, see more into here.

Instructions

1

Open the Firmware Update Web Page

Fluora FirmwareFluora Firmware

2

Follow the instructions on the web page

3

Still having trouble?

Please reach out to customer service.

space

Please follow the more detailed instructions here.

How to update Monos via USB

Drivers

If your computer is not recognizing your Fluora or Monos device, please download the relevant driver onto your computer

Mac Driver

https://firmware.fluoraplant.com/Fluora_CH340G_Driver_Installer.pkgfirmware.fluoraplant.com

Windows Driver

https://firmware.fluoraplant.com/Fluora_CH340G_Driver_Installer.exefirmware.fluoraplant.com

Access Code for Advanced Features

If you need access to the Advanced Features section of the USB Flasher, please reach out to customer service at [e-mail].